Cp-electronics VITM4-MWS6-PRM Instrukcja Użytkownika
Przeglądaj online lub pobierz Instrukcja Użytkownika dla Przekaźnik Cp-electronics VITM4-MWS6-PRM. CP Electronics VITM4-MWS6-PRM User Manual Instrukcja obsługi
- Strona / 8
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Overview
The MWS6-PRM microwave presence detector provides
automatic control of lighting loads with optional manual
control.
The MWS6-PRM detects movement using a highly
sensitive microwave detector. This works by emitting low
power microwave signals and measuring the reflections as
the signals bounce off moving objects.
The output channel comprises a mains voltage relay
capable of simple on/off switching.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty. Optional settings allow lights to be turned off in
response to ambient daylight.
All functionality is fully programmable using an IR handset.
Features
Front features
Back features
Ceiling microwave presence/absence detector
MWS6-PRM
Product Guide
Microwave Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
Power Input & Switched Output Connector
Used to connect mains power to the unit and to connect a
switched load.
Switch Input Connector
Two input terminals can be used to manually override the
lights on or off.
Walk Test LED active
when movement is detected
Valid setting received
Retaining Spring
Retaining Spring
Power Input
& Switched
Output Connector
Switch Input
Connector
Sensor Lens
which covers...
Microwave Sensor
IR Receiver
Light Level Sensor
Status LEDs
Mounting Bezel
Podsumowanie treści
Strona 1 - MWS6-PRM
Overview The MWS6-PRM microwave presence detector provides automatic control of lighting loads with optional manual control. The MWS6-PRM detects
Strona 2 - Sensor functionality
2 Detection diagram Area of lower sensitivity Area of high sensitivity Detection Mode The Detection Mode can be set to behave in Presence or Absence
Strona 3 - Power-up test procedure
3 Installation Absence detection To use absence detection a retractive (momentary) switch must be connected between the 2 terminals on the diagra
Strona 4
4 The MWS6-PRM is designed to be mounted using either: Flush fixing, or Surface fixing, using the optional Surface Mounting Box (part no. DBB)
Strona 5 - Fault finding
5 Basic programming Parameter Name Default Value 0 1 2 3 UHS5 Handset Graphics Description Button Activation On On Turn ligh
Strona 6 - Advanced programming
6 Advanced programming Parameter Name Default Value Range / Options Description UHS5 UNLCDHS Detector Parameters Walk Test LED Off On or O
Strona 7
7 This page intentionally left blank
Strona 8 - Technical data
8 Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior noti
Powiązane produkty i podręczniki dla Przekaźnik Cp-electronics VITM4-MWS6-PRM
(12 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji